Armstrong XL Supergrip Spectrum Marbella Fawn

• Underfloor HeatingYes
• Installation MethodsGlue Down, Loose Lay
• Residential Warranty5 year              
• ShadeMedium
• ColourBeige
• StylePlain
• InstallationSpray Down
• Size2,3 and 4 Metre Widths

Before you begin to install your vinyl flooring there are a couple of things that you need to do first that are quite important.

Firstly you need to leave your vinyl flooring for at least an hour and even better 2 hours at room temperature to become a little more flexible.

Now if you are laying your new vinyl flooring onto a concrete sub base you just need to make sure that there is not to much moisture in the sub floor. If you think there may be then you will need to add a damp proof membrane (don’t worry you will be offered this option before checkout) to the flooring.

Secondly with a concrete sub floor you will need to make sure that it is smooth and level without to many undulations. You can achieve this with a self levelling compound.

Once you have done these three things you will be ready to install your new vinyl flooring.

However it’s a slightly different process if you have a wooden sub floor.

Firstly if you have floorboards or chipboard it is always advisable to board out the room with 6mm plywood to create a better finish to the end product. You will then need to make sure that they are well secured down without any screws or nails sticking up.

Once you have done these things you will be ready to install your new vinyl flooring.